Filter
Top Products
13-10 SUSPENSION
Front Fork
•
Remove the cylinder unit [A], washer, and the spring [B]
from the inner tube.
•
Remove the following from the top of the outer tube:
Dust Seal [A]
Retaining Ring [B]
•
Separate the inner tube [A] from the outer tube [B].
NOTE
○
From the compressed state, firmly pull down the outer
tube a few times towards the direction of elongation.
•
Remove the following from the inner tube:
Guide Bushing (inner) [A]
Guide Bushing (outer) [B]
Washer [C]
Oil Seal [D]
•
Remove the cylinder base [A] from the bottom of the outer
tube.