Filter
Top Products
ELECTRICAL SYSTEM 16-49
Electric Starter System
Starter Motor Removal
CAUTION
Do not tap the starter motor shaft or body. Tapping
the shaft or body could damage the motor.
•
Slide back the rubber cap [A].
•
Remove the starter motor terminal nut [B].
•
Remove the m ounting bolts [A].
•
Pull out the starter motor [B].
Starter Motor Installation
CAUTION
Do not tap the starter motor shaft or body. Tapping
the shaft or body could damage the motor.
•
When installing the starter m otor, clean the starter mo-
tor legs [A] and crankcase [B] w here the starter motor is
grounded.
•
Replace the O-ring [A] with a new one.
•
Apply grease to the O-ring.
•
Tighten:
Torque - Starter Motor Mounting Bolts: 11 N·m (1.1 kgf·m,
95 in·lb)
Starter Motor Disassembly
•
Take off the starter motor through bolts [A] and remove
both end covers [B] and pull the armature out of the yoke
[C].