Filter
Top Products
2-10 PERIODIC MAINTENANCE
Specifications
Item Standard Service Limit
Fuel System:
Throttle grip free play 2 ∼ 3 mm (0.08 ∼ 0.12 in.) –––
Idle speed 1 100 ±50 r/min (rpm) –––
Bypass screws (turn out) 2 ±1/4 (for reference) –––
Engine vacuum 29.7 ±1.333 kPa (225 ±10 mm Hg) –––
Air cleaner element Paper filter –––
Cooling System:
Coolant:
Type (recommended) Permanent type of antifreeze –––
Color G reen
–––
Mixed rat io Soft water 50% , Coolant 50% –––
Freezing point –35°C (–31°F) –––
Total amount 2.9 L (3.1 US qt) –––
Engine Top End:
Valve clearance:
Inlet
0.15 ∼ 0.24 mm (0.0059 ∼ 0.0094 in.)
–––
Exhaust 0.22 ∼ 0.31 mm (0.0087 ∼ 0.0122 in.) –––
Clutch:
Clutch lever free play 2 ∼ 3 mm (0.08 ∼ 0.12 in.) –––
Engine Lubrication System:
Engine oil:
Type API SE, SF or SG –––
API SH or SJ with JASO MA
Viscosity SAE 10W-40 –––
Capacity 3.1 L (3.3 US qt) –––
(when filter is not removed)
3.3 L (3.5 US qt) –––
(when filter is removed)
3.8 L (4.0 US qt) –––
(when engine is completely dry)
Level Between upper and lower level lines
(after idling or running)
–––
Wheels/Tires:
Tread depth:
Front
BRIDGESTONE 3.4 mm (0.13 in.) 1 mm (0.04 in.)
1.6 mm (0.06 in.)
(AT, CH, DE)
Rear
BRIDGESTONE 5.8 mm (0.23 in.) Up to 130 km/h (80 mph):
2 mm (0.08 in.)
Over 130 km/h (80 mph):
3 mm (0.12 in.)