Filter
Top Products
SUSPENSION 13-15
Swingarm
Swingarm Removal
•
Raise the rear wheel off the ground with jack.
Special Tool - Jack: 57001–1238
•
Remove:
Chain Cover (see Final Drive chapter)
Mud Guard (see Frame chapter)
Brake Hose C lamp [A]
Rear Wheel (see Wheels/Tires chapter)
Lower Shock Absorber Nut and Bolt [A]
Upper Tie-rod Nut and Bolt [B]
•
Remove the both frame cover (see Frame chapter).
•
Unscrew the swingarm pivot locknut [A], using the nut
wrench [B].
Special Tool - Swingarm Pivot Nut Wrench: 57001–1541
•
Unscrew the swingarm pivot nut [A] and loosen the
swingarm pivot shaft [B].
•
Pull off the pivot shaft and remove the swingarm.