Filter
Top Products
16-80 ELECTRICAL SYSTEM
Junction Box
The junction box [A] has fuses [B], relays, and diodes.
The relays and diodes can not be removed.
Junction Box Fuse Circuit Inspection
•
Remove the seats (see Frame chapter).
•
Remove the junction box [A].
•
Pull off the connectors [A] from the junction box [B].
•
Make sure all connector terminals are clean and tight, and
none of them have been bent.
Clean the dirty terminals, and straighten slightly–bent ter-
minals.
•
Check conductivity of the numbered terminals with the
hand tester.
○
Refer to the Junction Box Internal Circuit.
If the tester does not read as specified, replace the junc-
tion box.
Special Tool - H and Tester: 57001–1394
Fuse Circuit Inspection
Tester Tester Test er Teste r
Connection Reading (Ω) Connection Reading (Ω)
1-1A 0 1A - 8 ∞
1-2 0 2-8 ∞
3A - 4 0 3A - 8 ∞
6-5 0 6-2
∞
6-10 0 6-3A
∞
6-7 0 17 - 3A
∞
6-17 0