ENGINE RIGHT SIDE 5-15
Primary Gear
•
Install the spring washer [A] with the concave side facing
to the inward.
•
Temporarily tighten the primary gear nut [B].
•
Tighten the primary gear nut
○
Primary gear nut is left-hand threads.
Torque - Primary Gear Nut: 49 N·m (5.0 kgf·m, 36 ft·lb)
Special Tools - Flywheel & Pulley Holder: 57001-1605
NOTE
○
Use the fly wheel & pulley holder to prevent the crank-
shaft from the rotating.
•
Install:
Right Engine Cover (see Right Engine Cover)
Magneto Cover