10-6 BRAKES
Brake Lever, Brake Pedal
•
Remove the brake pedal mounting bolt [A] and take off
the brake pedal and return spring [B].
Brake Pedal Installation
•
Check the pedal O-ring for signs of damage. If necessary,
replace them with new one.
•
Apply high temperature grease to the shaft portion of the
brake pedal, and install the pedal with return spring onto
the frame.
Torque - Brake Pedal Mounting Bolt: 25 N·m (2.5 kgf·m, 1 8
ft·lb)
•
Check the brake pedal position.
•
Install the joint pin, washer and a new cotter pin.