Filter
Top Products
11-20 SUSPENSION
Swingarm
Swingarm Bearing Installatio n
•
Replace the needle bearings, dust seals and oil seals with
new ones.
•
Apply plenty of grease to the dust seals, oil seals and
needle bearings.
NOTE
○
Install the needle bearings so that the manufacturer’s
marks face out.
Special Tool - Bearing Driver Set: 57001-1129
•
Install the needle bearings [A] dust seals [B] and oil seals
[C] position as shown.
○
The installation procedure is the same as the counter
side.