Filter
Top Products
33
Reference Manual
00809-0100-4444, Rev AC
Section 2: Quick Installation and Start-Up
January 2015
Quick Installation and Start-Up
2.12.6 Powering the transmitter
The 8732EM transmitter is available in two models. The AC powered transmitter is designed to
be powered by 90-250VAC (50/60Hz). The DC powered transmitter is designed to be powered
by 12-42VDC. Before connecting power to the 8732EM, be sure to have the proper power
supply, conduit, and other accessories. Wire the transmitter according to national, local, and
plant electrical requirements for the supply voltage. See
Figure 2-25 or Figure2-26.
Figure 2-25. DC Power Requirements
Peak inrush is 42A at 42VDC supply, lasting approximately 1ms
Inrush for other supply voltages can be estimated with:
Inrush (Amps) = Supply (Volts) / 1.0
Figure 2-26. AC Power Requirements