Filter
Top Products
14
Reference Manual
00809-0100-4444, Rev AC
Section 2: Installation
January 2015
Quick Installation and Startup
2.9 Sensor installation
2.9.1 Flanged sensors
Gaskets
The sensor requires a gasket at each process connection. The gasket material must be compatible with
the process fluid and operating conditions. Gaskets are required on each side of a grounding ring
(see
Figure 2-7). All other applications (including sensors with lining protectors or a grounding
electrode) require only one gasket on each process connection.
Figure 2-7. Flanged Gasket Placement
A. Grounding Ring and Gasket (Optional)
B. Customer-supplied Gasket
NOTICE
Metallic or spiral-wound gaskets should not be used as they will damage the liner face of the
sensor. If spiral wound or metallic gaskets are required for the application, lining protectors
must be used.
B
A
FLOW