Filter
Top Products
214
Reference Manual
00809-0100-4444, Rev AC
Appendix B: Product Specifications
January 2015
Product Specifications
ASME B16.47
30-in. to 36-in. (Class 150)
30-in. to 36-in. (Class 300)
AWWA C207 Class D
30-in. and 36-in.
MSS SP44
30-in. to 36-in. (Class 150)
EN 1092-1
200 mm to 900 mm (8-in. to 36-in.) PN10
100 mm to 900 mm (4 -in. to 36-in.) PN16
200 mm to 900 mm (8-in. to 36-in.) PN 25
15 mm to 900 mm (
1
/2-in. to 36-in.) PN40
AS2129
15 mm to 900 mm (
1
/2-in. to 36-in.) Table D and E
AS4087
50 mm to 600 mm (2-in. to 24-in.) PN16, PN21, PN35
JIS B2220
15 mm to 200 mm (
1
/2-in. to 8-in.) 10K, 20K, 40K
Electrical connections
Conduit entries:
1
/2 inch NPT or M20.
Terminal block screws: 6-32 (No. 6) suitable for up to 14 AWG wire.
Safety grounding screws: external stainless assembly, M5; internal 8-32 (No. 8)
Process reference electrode (optional)
A process reference electrode can be installed similarly to the measurement electrodes through
the sensor lining on 8705 sensors. It will be made of the same material as the measurement
electrodes.