Filter
Top Products
26
Reference Manual
00809-0100-4444, Rev AC
Section 2: Installation
January 2015
Quick Installation and Startup
Figure 2-15. Best Practice Conduit Preparation
A. Power
B. Output
C. Coil
D. Electrode
2.12.3 Connecting sensor to transmitter
Integral mount transmitters
Integral mount transmitters ordered with a sensor will be shipped assembled and wired at the
factory using an interconnecting cable. (See Figure 2-16). Use only the socket module or IMS
cable provided by Emerson Process Management.
For replacement transmitters use the existing interconnecting cable from the original assembly.
Replacement cables are available.
Figure 2-16. Interconnecting Cables
Remote mount transmitters
Cables kits are available as individual component cables or as a combination coil/electrode
cable. Remote cables can be ordered direct from Emerson Process Management using the kit
numbers shown in Tabl e 2 -11 . Equivalent Alpha cable part numbers are also provided as an
alternative. To order cable, specify length as quantity desired. Equal length of component
cables is required.
Example: 25 feet = Qty (25) 08732-0065-0001
A
B
B
C
D