Filter
Top Products
139
Reference Manual
00809-0100-4444, Rev AC
Section 8: Maintenance
January 2015
Maintenance
8.4 Replacing 8732EM revision 4 electronics stack
Prior to installing the replacement electronics stack, it is important to verify that the transmitter
housing you have is of the correct design to accept the Revision 4 electronics.
Follow the steps below to confirm the transmitter housing is compatible with this electronics
kit.
1. Verify the model number is 8732EM. If the transmitter model is not 8732EM, then
these electronics are not compatible. See Figure 8-2 for the location of the model
number. If the model is 8732C, 8742C, 8732ES, or some other model, then these
electronics are not compatible with the enclosure. If you have one of these
transmitters, a full replacement transmitter will be required. Consult the 8700M
Product Data Sheet (00813-0100-4444) for details on ordering a new transmitter.
Figure 8-2. Transmitter Nameplate Location