Filter
Top Products
211
Reference Manual
00809-0100-4444, Rev AC
Appendix B: Product Specifications
January 2015
Product Specifications
Polyurethane lining
0 to 140 °F (–18 to 60 °C)
Neoprene lining
0 to 176 °F (–18 to 80 °C)
Linatex lining
0 to 158 °F (–18 to 70 °C)
Adiprene lining
0 to 200 °F (–18 to 93 °C)
Ambient temperature limits
–20 to 140 °F (–29 to 60 °C)
Pressure limits
See Table B-1, Table B-2 and Table B-3
Vacuum limits
PTFE lining
Full vacuum to 350 °F (177 °C) through 4-in. (100 mm) line sizes. Consult factory for vacuum
applications with line sizes of 6 inches (150 mm) or larger.
All other standard sensor lining materials
Full vacuum to maximum material temperature limits for all available line sizes.
Submergence protection (IP68)
The remote mount 8705-M sensor is rated IP68 for submergence to a depth of 33 ft. (10 m) for a
period of 48 hours. IP68 rating requires the transmitter must be remote mount. Installer must
use IP68 approved cable glands, conduit connections, and/or conduit plugs. For more details on
proper installation techniques for IP68 submersible application, reference Rosemount Technical
Note 00840-0100-4750 available on www.rosemount.com.
Conductivity limits
Process liquid must have a minimum conductivity of 5 microSiemens/cm (5 micromhos/cm) or
greater.