Filter
Top Products
28
Reference Manual
00809-0100-4444, Rev AC
Section 2: Installation
January 2015
Quick Installation and Startup
Cable requirements
Shielded twisted pairs or triads must be used. For installations using the individual coil drive and
electrode cable, see Figure 2-17. Cable lengths should be limited to less than 500 feet (152 m).
Consult factory for length between 500-1000 feet (152-304 m). Equal length cable is required
for each.
For installations using the combination coil drive/electrode cable, see Figure 2-18. Combination
cable lengths should be limited to less than 330 feet (100 m).
Figure 2-17. Individual Component Cables
Figure 2-18. Combination Coil / Electrode Cable