Filter
Top Products
19
Reference Manual
00809-0100-4444, Rev AC
Section 2: Quick Installation and Start-Up
January 2015
Quick Installation and Start-Up
2.10 Wafer sensors
2.10.1 Gaskets
The sensor requires a gasket at each process connection. The gasket material selected must be
compatible with the process fluid and operating conditions. Gaskets are required on each side of
a grounding ring. See Figure 2-9 below.
Figure 2-9. Wafer Gasket Placement
NOTICE
Metallic or spiral-wound gaskets should not be used as they will damage the liner face of the
sensor.