Filter
Top Products
APPENDIX 17-7
Cable, Wire, and Hose Routing
1. Run the main harness through lower and right side of the thermostat.
2. Frame ground (with thermostat bracket)
3. Igniti
on switch connector
4. Meter ground (with thermostat)
5. Engine harness (Connect the harness on the cross pipe.)
6. Water
temperature sensor
7. Inlet air pressure sensor
8. Clamp
9. To pi
ckup coil and oil pressure switch
10. To fuel level gauge and fuel reserve switch
11. To fuel pump
12. Brac
ket
13. Insert the fuse holder under the left side bolt that connects the battery case with tool case to
tighten temporarily.
14. Sto
rage compartment
15. Battery case
16. ECU fuse
17. Reg
ulator/rectifier
18. Run the lead through the inside of the pipe.
19. Speed sensor
20
.
Si
de stand switch
21. Neutral switch
22. To alternator
23
.
To
ignition coil
24. Horn
25. Horn lead
2
6.
C
am sensor
27. Fan switch
28. Run the harness between the engine bracket and the left side space of the baffle plate.
2
9.
S
tarter cable