Filter
Top Products
FUEL SYSTEM (DFI) 3-93
Throttle Body Assy
CAUTION
Never drop the i njector, especially on a hard sur-
face. Such a shock to the injector can damage it.
•
Pull out [A] the injectors along with the delivery pipe [B].
If necessary, remove the injectors from the delivery pipe.
Replace the O-rigs of the indicators.
If necessary, cut straps and take the harness off the de-
livery pipe.
Throttle Body Assy Assembly
○
Replace the O-rings [ A] of injectors and the seals [B] with
the new ones.
•
Before assembling, blow away dirt or dust from the throttle
body and delivery pipe by applying compressed air.
•
Apply engine oil to the new O-rings of each injector [C],
insert them into the delivery pipe [ D] and confirm whether
the injectors turn smoothly or not.
•
Install the injectors along with the delivery pipe assy i nto
the throttle bodies [E].
Torque - Delivery Pipe Screws: 3.4 N·m (0.35 kgf·m, 30
in·lb)
•
Connect all the connectors [A], including the subthrot-
tle valve actuator connector [C] and bind the leads with
straps [B].
•
Insert the each hoses onto the throttle body fittings.
•
Install the throttle body assy (see Throttle Body Assy In-
stallation).