Filter
Top Products
9-10 CRANKSHAFT/T RANSMISSION
Crankcase Splitting
•
Apply liquid gasket to the breather plate mating surface
[A] 1 to 1.5 mm (0.04 to 0.06 in.) thick, and then install
the bre
ather plate.
Sealant - Three Bond: 1207B
•
Apply a non-permanent locking agent to the t hreads and
tighten the bolts [A].
Torque - Breather Plate Bolts: 10 N·m (1.0 kgf·m, 87 in·lb)
•
Install the breather hose [A].
○
Align the white mark on the hose with the white mark on
the pipe.
○
Install the clamp [B] so that its head faces to right side.
[C] Breather Plate
•
Install:
Crankshaft and Connecting Rods
Camshaft Chain [A]
Transmission Shafts and Gears
Dowel Pins [B]
Shift Drum
Shift Forks and Shift Rods
•
Before fitting the lower case on the upper case, check t he
following.
○
Be sure to hang the camshaft chain on the crankshaft.
○
Check to see that the shift drum and transmission gears
are in the neutral position.