Filter
Top Products
4-18 COOLING SYSTEM
Radiator Fan Switch, Water Temperature Sensor
CAUTION
The fan switch or the w ater temperature sensor
should never be allowed to fall on a hard surface.
Such a shock to their parts can damage them.
Radiator Fan Switch Removal
•
Drain the coolant (see Coolant Change in the Periodic
Maintenance chapter).
•
Remove the screws [A] and take off t he left radiator cover
[B].
•
Remove:
Radiator Fan Switch Lead Connector [A]
Radiator Fan Switch [B]
Radiator Fan Switch Installation
•
Tighten:
Torque - Radiator Fan Switch : 18 N·m (1.8 kgf·m, 13 ft·lb)
•
Fill the coolant and bleed the air from cooling system (see
Coolant Change in the Periodic Maintenance chapter ).
Radiator Fan Switch Inspection
•
Refer to the Electrical System chapter for its inspections.
Water Temperature Sensor Removal
•
Refer to the Fuel System (DFI) chapter.
Water Temperature Sensor [A]
Front [B]
Water Temperature Sensor Inspection
•
Refer t o the Electrical System chapter for the water Tem-
perature Sensor Inspection.