Filter
Top Products
7-14 ENGINE LUBRICATION SYSTEM
Oil Cooler
Oil Cooler Removal
•
Drain:
Coolan
t (see Periodic Maintenance chapter)
Engine Oil (see Periodic Maintenance chapter)
•
Remove:
Oil Fil
ter (see Periodic Maintenance chapter)
Water Hose [A]
Oil Cooler Mounting Bolt [B] and Washer
Oil Coo
ler [C] and Water Hose
Oil Cooler Installation
•
Install:
Water Hose [A]
•
Tighten:
Torque - Water Hose Clamp Screws: 2.0 N·m (0.2 kgf·m, 17
in·lb)
•
Ap
ply grease to the O-ring [B] before installation.
•
Install the oil cooler so that the crankcase rib [A] fits the
slot [B] of the cooler.
•
Apply engine oil to t he oil cooler mounting bolt [A] before
installation.
•
Install:
Washer [B]
•
Tighten:
Torque - Oil Cooler Mounting Bolt: 78.5 N·m (8.0 kgf·m, 58
ft·lb)
•
Install:
Oil Filter (see Periodic Maintenance chapter)
•
Pour:
Coolant (see Periodic Maintenance chapter)
Engine Oil (see Periodic Maintenance chapter)