13-20 SUSPENSION
Swingarm
Swingarm Removal
•
Remove the m uffler bodies (see Engine Top End chapter.)
•
Raise t
he rear wheel off the ground with jack.
Special Tool - Jack: 57001–1238
•
Remove:
Rear Wheel (see Wheels/Tires chapter.)
Chain Cover (see Final Drive chapter.)
Mud Guard (see Frame chapter.)
Brake Hose Clamp [A]
Lower Shock Absorber Nut and Bolt [A]
Upper Tie-Rod Nut and Bolt [B]
•
Remove the right frame cover (see Frame chapter).
•
Loosen the upper shock absorber nut.
•
Unscrew the swingarm pivot locknut [A], using the socket
wrench [B].
Special Tool - Socket Wrench: 57001–1370
•
Unscrew the swingarm pivot nut [A] and loosen the
swingarm pivot shaft [B].
•
Pull off the pivot shaft and remove the swingarm.