Filter
Top Products
16-72 ELECTRICAL SYSTEM
Meter, Gauge, Indicator Unit
•
If the oscillator is not available, the tachometer can be
checked as f ollows.
○
Connec
t t he 12 V battery and terminals in the same man-
ner as specified in the "Liquid Crystal Display (LCD) Seg-
ments C heck".
○
Using
an auxiliary wire, quick open and connect the ter-
minal [1] to the terminal [7] repeatedly.
○
Then the tachometer segment [A] should flick [B].
If th
e segment does not flick, replace the meter assembly.
LED Lights Inspection:
•
Connect t he 12 V battery and terminals in the same man-
ner as specified in the “Liquid Crystal Display (LCD) Seg-
ments check.”
Neutral Indicator Light (LED) [A]
FI Indicator Light (LED) [B]
Oil Pressure Warning Indicator Light (LED) [C]
Right Turn Signal Indicator Light (LED) [D]
Left Turn Signal Indicator Light (LED) [E]
High Beam Indicator Light (LED) [F]
•
U
sing the auxiliary leads, connect a 12 V battery to the
meter unit connector as follows.
Neutral Indicator Light (LED):
B
attery Negative (–) Terminal To Terminal [5]
FI Indicator Light (LED):
Battery Negative (–) Terminal To Terminal [6]
Oil Pressure Warning Indicator Light (LED):
Battery Negative (–) Terminal To Terminal [11]