Kawasaki Z1000 Motorcycle User Manual


 
16-10 ELECTRICAL SYSTEM
Specif ications
Item Standard
Battery:
Type Sealed Battery
Capacity 12 V 8 Ah
Volta
ge
12.6 V
or more
Charging System:
Type Three–phase AC
Alternator output voltage 42 V or more
Stator coil resistance 0.3 0.4
Charging voltage 14.7 ± 0.5 V
(regulator/rectifier output voltage)
Ignition System:
Crankshaft sensor resistance 376 564
Crankshaft sensor peak voltage 1.9 V or more
Camshaft Position Sensor resistance 400 460
Camshaft Position Sensor peak voltage 0.2 V or m ore
Stick coil:
Primary winding resistance 1.04 1.56
Secondary winding resistance 10.8 16.2 k
Primary peak voltage 88 V or more
Spark plug:
Spark plug gap 0.7 0.8 mm (0.028 0.031 in.)
IC igniter inspection:
in the text
Electric Starter System:
Starter motor:
Brush length 12 mm (0.47 in.) (Service limit: 8.5 mm, 0.33 in.)
Commutator diameter 28 mm (1.10 in.) (Service limit: 27 m m, 1.06 in.)
Switch and Sensor:
Speedometer sensor
in the text
Rear brake light switch timing ON after about 10 mm pedal travel
Engine oil pressure switch connections
When engine is stopped: ON
When engine is running: OFF
Fan switch connections
Rising temperature From OFF to ON @ 93 103°C (199 217°F)
Falling temperature
Fan s tops with the temperature 3 C(38 46 °F)
lower than the operation temperature range.
ON: Less than 0.5
OFF: More than 10 M
Water temperature sensor resistance in the text
Fuel level sensor resistance:
Fuel position
4 10
Empty position 90 100
Fuel reserve switch in the text