Filter
Top Products
WHEELS/TIRES 10-11
Wheels (Rims)
(b)Whenthetireisontherim.
•
Pry [A] the balance weight off the rim flange using a reg-
ular tip screwdriver as shown in the figure.
○
Insert a tip of the screwdriver between the tire bead [B]
and weight blade [C] until the end of the tip reaches the
end of the weight blade.
○
Push the driver grip toward the tire so that the balance
weight slips off the rim flange.
•
Discard the used balance weight.
Balance Weight Installation
•
Check if the weight portion has any play on the blade and
clip.
If it does, discard it.
WARNING
If the balance weight has any play on the rim, t he
blade and/or clip of the weight have been stretched.
Replace the l oose balance weight.
Do not reuse used balance weight.
Unbalanced wheels can create an unsafe riding
condition.
•
Lubricate the balance weight blade, tire bead, and rim
flange with a soap and water solution or rubber lubricant.
This helps the balance weight slip onto the rim flange.
CAUTION
Never lubricate with engine oil or petroleum distil-
lates because they will deteriorate the tire.