DeLorme 9.0 GPS Receiver User Manual


 
DeLorme Topo North America 9.0 User Guide
86
To Print Maps With a Yellow/Black Background
Use the following steps to turn on the yellow/black background when printing a map.
1. Center the map on the area you want to print.
2. Click the Print tab and then click the Map subtab.
3. Select the Print Layout options. For more information, see Printing a Map
.
4. Click Setup.
The Print Setup dialog box opens.
5. At the bottom of the dialog box, clear the Print Maps with a Transparent
Background check box.
6. Click OK.
All map printouts print with a yellow background (or black if you are using High
Contrast Colors).
Manually Assembling a Multi-page Map
After you have printed the sheets for your multi-page map, you are ready to assemble the
map.
Before you begin, be sure you have a clear work surface large enough to accommodate the
final map size.
You will need the following tools to assemble your map:
Pencil
Razor knife
Straight-edge ruler (longer than the edge of the longest sheet)
Permanent tape (invisible or "magic" type)
Removable tape
To Manually Assemble a Multi-page Map
Use the following steps to manually assemble a multi-page map.
1. For each sheet that needs to be trimmed, mark the edges of the sheet to indicate the
areas to trim.
2. Use the straight edge ruler and razor knife to trim each sheet to the thin black line
bordering the map.
Note For adjacent sheets, trim only one page. This makes piecing the sheets
together easier.
The following diagrams of a 2 x 2 and 3 x 3 multi-page map provide additional
information on where to trim the sheets. The arrows indicate the edges to be
trimmed.
2 x 2 multi-page Map