Filter
Top Products
DeLorme Topo North America Help
121
2. To place a routable road or trail, click and hold the Routable Road/Routable Trail
tool
and select the tool you want.
OR
To place a line/arc/spline, click and hold the Line/Arc/Spline tool
and select the tool you want. Then, select the line, style, width (if available), and
color for your line/arc/spline.
3. Select the Coordinate option, or use the Distance and Bearing/Angle option in
conjunction with the Coordinate option, and enter the appropriate coordinates or
numbers into the corresponding text boxes to the right of the text style options box.
Note If you are placing an arc, enter new numbers into the Distance and
Bearing/Angle text boxes for the two base points of the arc only. When the central
shape point of the arc is selected, the text options change from Distance and
Bearing/Angle to Radius and Direction. Enter the appropriate radius number and
direction to change the radius for this point.
4. Click Apply and repeat the procedure for the second point.
The line object displays on the map at those coordinates, distance, and bearing or
angle.
OR
After placing the first point coordinate, move your pointer to the map screen and
place the other points by hand by clicking on the screen.
5. To place additional points, lines, or other draw objects on the map in reference to the
first line, enter a specific distance and bearing into the corresponding text boxes and
click Apply.
Joining and Breaking Linear Objects
You can join two or more routable roads/trails, tracks, lines, arcs, or splines into a single
entity. You can also break routable roads/trails, tracks, lines, or splines. You cannot break
arcs.
To Join
Use the following steps to join linear objects.
1. Click the Draw tab.
2. Click the Select tool
, press and hold the SHIFT key on the keyboard, and select
any lines, arcs, or splines you want to join.
OR
Click the Select tool
and drag a box around the linear objects you want to
join.
Note When joining the preceding types of line objects, you can mix and match lines,
arcs, and splines. The result is always a line. However, when you join multiple
splines, the resulting joined object is a spline.
3. Right-click, point to Manage Draw, and then click Join Lines.
OR
Join the lines by pressing CTRL+J or the keyboard shortcut combination you assigned
for the joining function.
The selected lines are joined.
Note Any other objects selected during the multi-select process are ignored.