Filter
Top Products
DeLorme Topo North America 9.0 User Guide
198
Step 3—View what will sync
To view the contents of the project, click Project Contents. To view what is on the
device/SD card, click GPS Contents. To view a detailed list for a category with contents,
click it.
Step 4—Make changes
• To include or exclude a specific file, layer, or map, select or clear its check box.
• To change the location for the file after sync, click the toggle
in the Select
Destination column. The selected location is blue.
• The toggle on the project side indicates where you are sending the file to—
select GPS for the device's internal drive. Select SD for an SD card in the
device.
• The toggle on the GPS side allows you to move a file, layer, or map. For
example, if you have a waypoint file on your devices' internal drive, you
might want to move it to the SD card.
• If an option is grayed out, it is unavailable for that data.