Filter
Top Products
DeLorme Topo North America 9.0 User Guide
208
3. Under Select Device, select GPS or point to Athletic Device and then select your
device.
4. Select Send to Device.
5. Select Route Points from the Object Type drop-down list.
6. Click Next.
7. From the Route drop-down list, select the route file that contains the route points
you want to send to your device.
8. To avoid overwriting existing points on your device, type a starting point for the new
points and select the Prefix a Number to the Waypoint Name check box. Not all
devices support starting points. For more information, see your device manual.
9. Click Send to Device.
10. Repeat the steps for every route file you want to send to your device.
11. Click Finish.
To Send Route Directions
Use the following steps to send route directions to your GPS device.
1. Connect your device to your computer.
You may have to use specific settings for your device. For example, if you are using
a GARMIN GPS receiver, set your GARMIN receiver interface to GRMN/GRMN. For
more information, see your device owner manual.
2. Click the arrow next to the Sync button
on the toolbar and click Other
Device to open the Exchange Wizard.
3. Under Select Device, select GPS or point to Athletic Device and then select your
device.
4. Select Send to Device.
5. Select Route Directions from the Object Type drop-down list.
6. Click Next.
7. From the Route drop-down list, select the route file that contains the route
directions you want to send to your device.
8. Designate a route name and/or a route number for the file on the device (device
dependent).
9. To avoid overwriting existing points on your device, type a starting point for the new
points and select the Prefix a Number to the Waypoint Name check box. Not all
devices support starting points. For more information, see your device manual.
10. Click Send to Device.
11. Repeat the steps for each route file you wan to send to your device.
12. Click Finish.
Sending Tracks
Third-party GPS
If you have a compatible GPSor athletic device, you can use the Exchange Wizard to send
tracks to your device.
To Send Tracks
Use the following steps to send tracks to your device.