Filter
Top Products
DeLorme Topo North America 9.0 User Guide
192
Make Changes
You can change what will sync and where it will sync to. Each layer, file, route, or map can
be individually controlled.
• To exclude something from syncing, clear its check box.
• To change the location for the file after sync, click the toggle
in the Select
Destination column. The selected location is blue.
• The toggle on the project side indicates where you are sending the file to—
select GPS for the device's internal drive. Select SD for an SD card in the
device.
• The toggle on the GPS side allows you to move a file, layer, or map. For
example, if you have a waypoint file on your device's internal drive, you
might want to move it to the SD card.
• If an option is grayed out, it is unavailable for that data.
View Available Memory
The Memory Preview area shows the approximate amount of memory that will be available
on your device and SD card after you sync. This can help you make decisions about where
to sync your data.