DeLorme 9.0 GPS Receiver User Manual


 
DeLorme Topo North America 9.0 User Guide
172
Click the Pause button
to pause the tracking of the log file. The Pause
button turns blue to indicate the file is paused. Click the Play button to continue
playing back the file.
Click the Stop button
to stop the play back. To start the file over, click
the Play button again.
Click and hold the Rewind button
to rewind the log file to a particular
point.
Click and hold the Forward button
to fast forward the log file to a
particular point.
Drag the slider in the Progress Bar to view a particular point in the log. You can
drag the slider forward or backward.
Previewing a GPS Log File
There are two ways to view an existing GPS log. You can play it back and watch it in real
time (point-by-point), or you can preview it and view the entire log area without waiting for
the playback to finish.
To Preview a Log File
Use the following steps to preview a log file.
1. Click the GPS tab and then click the GPS Log subtab.
2. Click Clear Trail to clear any existing GPS points from the map display.
3. Click File and then click Open.
4. Single click the file you want to view.
The bottom of the Open a GPL File dialog box opens the start location, start time,
start coordinate, total distance, duration, finish location, finish time, finish
coordinate, and the number of readings for the selected log.
5. Click Open.
6. Click File and then click File Preview.
The map centers on your log location.
Viewing File Details for a GPS Log
If you want more information about your GPS log than just seeing where you've been on the
map, the File Details option in the GPS Log subtab can give you a variety of information
about your journey.
For even more specific information about your log, simply play back
or preview your log and
then right-click a specific GPS point on the map to learn the date and time the point was
obtained as well as the speed, bearing, elevation, and GPS status for that particular point.
To View File Details for a GPS Log
Use the following steps to view log file details.