Filter
Top Products
DeLorme Topo North America 9.0 User Guide
106
To Change a Draw Object
Use the following steps to change a draw object type.
1. Use the Draw tab to place a draw object on the map.
2. To change a routable trail, track, or line to a road layer, right-click the object on the
map, point to Manage Draw, and then click Copy to Active Road Layer.
OR
To change a routable road or routable trail to a track layer, right-click the object on
the map, point to Manage Draw, and then click Copy to Active Track Layer.
OR
To change a routable road, track, or line to a trail layer, right-click the object, point
to Manage Draw, and then click Copy to Active Trail Layer.
OR
To change a routable road, routable trail, waypoint, or track to a draw layer, right-
click the object on the map, point to Manage Draw, point to Copy to Draw
Object, and then click the object to copy to.
OR
To create a copy of an existing area object, point object, or line object, right-click the
object on the map, point to Manage Draw, point to Copy to Draw Object, and
then click the object to copy to.
OR
To change a track to a GPS log, right-click the track on the map, point to Manage
Draw, and click Copy Track to GPS Log.
OR
To change a symbol to a waypoint, right-click the symbol on the map, point to
Manage Draw, and click Copy Symbol to Waypoint.
Tip You can also change a draw file type using the File section of the Draw tab. For more
information, see Copying a Draw File
.
Renaming a Draw File
Once you create a draw file, you can rename it in the draw file list or on the map.
To Rename a Draw File
Use the following steps to rename a draw file.
1. Click the Draw tab.
2. Click File to open the draw file editing area.
All the files you have created display in a table. A draw file with a selected check box
displays on the map.
3. Right-click the draw file and click Rename.
The file name area activates.
OR
Click within the file name cell once. Then, click it again (do not double click).
The file name area activates.
4. Type the new file name in the cell and press the ENTER key on your keyboard.