Filter
Top Products
DeLorme Topo North America 9.0 User Guide
150
Changing the Properties of a Stop Along Your Route
You can change the properties of a stop along your route by using the Stop Prefs function in
the Advanced sub-tab under Route.
To Change the Properties of a Stop
Use the following steps to change the properties of a stop.
1. Click the Route tab and then click Advanced.
2. Click a stop from the waypoint list and then click Stop Prefs.
The Stop Time Preferences dialog box opens.
3. To designate the stop as an end of day stop, select the End of Day check box, click
Apply, and then click Done.
OR
To designate the stop as a fuel break, select the Fuel check box, click Apply, select
the Duration check box, select the duration of the fuel break using the Hrs and Mins
drop-down lists, and then click Done.
Note It is not necessary to allocate a fuel stop duration.
Viewing Route Directions
After you create a route, you can view the accompanying route directions.
To View the Route Directions
Use the following steps to view the route directions.
1. Click the Route tab and then click Directions to open the Route Directions dialog
area.