Filter
Top Products
DeLorme Topo North America Help
209
1. Connect your device to your computer.
You may have to use specific settings for your device. For example, if you are using
a GARMIN GPS receiver, set your GARMIN receiver interface to GRMN/GRMN. For
more information, see your device owner manual.
2. Click the arrow next to the Sync button
on the toolbar and click Other
Device to open the Exchange Wizard.
3. Under Select Device, select GPS or point to Athletic Device and then select your
device.
4. Select Send to Device.
5. Select User Map Data - Track from the Object Type drop-down list.
6. Click Next.
7. Select the track file you want to send to your device from the Track File drop-down
list.
8. Optional. Designate a track name or a track number for the file on the device.
9. Click Send to Device.
10. Repeat the steps for every track file you want to send to your device.
11. Click Finish.
Sending Waypoints
Third-party GPS
If you have a compatible GPSor athletic device, you can use the Exchange Wizard to send
waypoints to your device.
To Send Waypoints
Use the following steps to send waypoints to your device.
1. Connect your device to your computer.
You may have to use specific settings for your device. For example, if you are using
a GARMIN GPS receiver, set your GARMIN receiver interface to GRMN/GRMN. For
more information, see your device owner manual.
2. Click the arrow next to the Sync button
on the toolbar and click Other
Device to open the Exchange Wizard.
3. Under Select Device, select GPS or point to Athletic Device and then select your
device.
4. Select Send to Device.
5. Select User Map Data - Waypoints from the Object Type drop-down list.
6. Click Next.
7. Select the waypoint file you want to send to your device from the Waypoint File
drop-down list.
8. To avoid overwriting existing waypoints on your device, type a starting point for the
new points and select the Prefix a Number to the Waypoint Name check box. Not
all devices support starting points. For more information, see your device manual.
9. Click Send to Device.
10. Repeat the steps for every waypoint file you want to send to your device.
11. Click Finish.