Filter
Top Products
E-89
Measured Data Operation
[Setting Procedure]
Start the procedure from the <Menu> screen of the <Sample> screen.
1
Use the or button of the cross key to move
the cursor to “Auto Target” and then press the
[SAVE/SEL] button.
The <Auto Target> screen is displayed.
2
Use the or button of the cross key to move
the cursor to “ON” or “OFF”.
Settings
❍ON: Use the Auto Target function for measurement.
❍OFF: Do not use the Auto Target function.
3
Press the [SAVE/SEL] button.
The selection is confirmed and the screen returns to the <Menu> screen.
Note
If you press the [TARGET] (Back) button without pressing the [SAVE/SEL] button, you return to the
sample data screen without changing the setting.
Delete All
Delete all the measured data.
[
Operating Procedure
]
Start the procedure from the <Menu> screen of the <Sample> screen.
1
Use the or button of the cross key to move
the cursor to “Delete All” and then press the
[SAVE/SEL] button.
The <Delete All> screen is displayed.