Filter
Top Products
E-48
Color Difference Target Color Data Operation
3
Place the specimen measuring port on the
specimen.
4
Make sure that (Ready to measure) is
displayed or Ready lamp is green, and then
press the measuring button.
The specimen is measured and the result is displayed on the
screen.
• When Scan Name is set to “Auto Scan” (refer to page E-
53 “Scan Name”), the <Scan Name> screen is displayed.
The bar code scanner reads a name, and the name is set as
the name of the target color data.
Note
If you selected a number to which target color data has
already been set, a message is displayed to confirm
overwriting.
5
To set more target colors, repeat steps 2 to 4.
Target Color Menu
The target color menu allows the following operations for target color data.
• Print: Print the target color data. This option can be selected only when a printer has been connected.
• Delete: Delete the target color data.
• Tolerance: Specify the tolerance (box tolerance) used for pass/fail judgment of measured data.
• Edit Name: Name the target color data.
•Scan Name:
The “name” of the target color data is read with a Bluetooth bar code scanner and is set as the data
name.
• List: Specify the columns displayed for each target color No. in the list.
• Data Protect:
Disable the deletion of the target color data. When Data Protect is specified, “Delete” and “Delete All”
in the <Menu> screen cannot be selected.
• Delete All: Delete all the target color data except for protected data.
Target name,
date & time, or
Pseudo color is
displayed.