Filter
Top Products
E-63
Setting the Default Color Difference Tolerance (Tolerance (Def.))
6
Press the [SAMPLE] (Edit) button and change
the setting.
• When you select an item which is currently checked and
press the [SAMPLE] (Edit) button, the check mark is
cleared. When you press the [SAMPLE] (Edit) button
again, the cursor moves to the setting value. Use the or
button of the cross key to change the value.
• When you select an item which is not currently checked
and press the [SAMPLE] (Edit) button, the cursor moves
directly to the setting value. Use or button of the cross key to change the value.
• To set each parameter l, c and h for CMC, ΔE*94 and ΔE00, place the cursor on the item and press the
[SAMPLE] (Edit) button, and the cursor moves to the value of the item. Press the or button of the
cross key to change the value.
M
emo
You can move the cursor between the digits of the value by pressing the or button of the cross key.
Settings
❍±0.0 to 20.0
* Settings of each parameter l, c and h for CMC, ΔΕ*94 and ΔE00 are 0.00 to 9.99.
• You need to press the [SAVE/SEL] (OK) button to confirm the change every time you change the setting
of an item.
7
When all items have been set, press the
[SAVE/SEL] button.
The settings are confirmed and the screen returns to the
<Tolerance(Def.)> screen.
M
emo
To set two or more default tolerances, repeat steps 3 through
7.
Note
If you press the [TARGET] (Back) button without pressing
the [SAVE/SEL] button, you return to the <Tolerance(Def.)> screen without changing the settings.