Filter
Top Products
E-58
Registering Conditions (Cond)
The CM-700d/600d allows registration of up to 8 conditions (display and measurement conditions) in
advance.
You can display measurement results under desired conditions by switching registered conditions stored
as “Cond 01 to 08”.
Note
When “Cond” is ON (When one of Cond 01 to 08 is selected), you cannot set the display and measurement
conditions with the <Option> screen.
M
emo
To register conditions, select one of Cond 01 to 08 before setting details. When Cond is OFF (normal condition
setting), the settings are not saved.
[Setting Procedure]
1
Hold down the [MENU] button and press the
button of the cross key.
The <Option> screen is displayed.
2
Use the button of the cross key to move the
cursor to “Cond/OFF” and then press the
[SAVE/SEL] button.
The <Cond> screen is displayed.