Filter
Top Products
E-13
Names and Functions of Parts
8 Measurement area selector
Used to change the lens position according to the
measurement area.
M
emo
The CM-600d does not have this switch.
9 Battery chamber cover
The cover of the battery chamber. Four AA-size batteries must be set in the battery chamber with the
correct polarity alignment.
10 Battery chamber cover button
Press this button to open or close the battery chamber cover.
11 READY Lamp
Ready to measure (and fully charged) when green.
12 Power switch
Used to turn ON/OFF power. Setting this switch to “ ” turns the power OFF, and setting it to “|”
turns the power ON.
13 Tripod mount
14 Target Mask
Used to change the measurement area according to the measurement area selector setting. Selectable
from several types depending on the application.
15 Specimen measuring port
The port for measuring the specimen.The port size can be changed by changing the Target Masks.
Note
The measurement area cannot be changed with the CM-600d.
16 Strap holder
Used to attach the supplied Wrist Strap.
M
emo
For details of attaching Wrist Strap, refer to “Attaching Wrist Strap to the Instrument” (page E-17).