Filter
Top Products
E-114
Connecting to an External Device
• From the list, find the Bluetooth address of the bar code
scanner you checked during the procedure of page E-111
“Preparation of the Bar Code Scanner”.
• The search result may not be correct depending on the radio
wave condition of the surrounding environment. If you
cannot find the Bluetooth address of your bar code scanner
in the list, make sure that the bar code scanner is turned ON
and its battery is fully charged, and then try the search
again.
5
Use the or button of the cross key to move
the cursor to the Bluetooth address of the bar
code scanner.
6
Press the [SAVE/SEL] button.
The bar code scanner is registered as the one used for data
name input.
Setting the PIN Code
[Operating Procedure] Start the procedure from the <Printer Reg.> screen.
1
Use the or button of the cross key to move
the cursor to “Set PIN Code” and then press
the [SAVE/SEL] button.