Filter
Top Products
E-43
Condition Setting
Mode
Select the specular component mode.
[Setting Procedure] Start the procedure from the <Meas. Cond.> screen.
1
Use the or button of the cross key to
move the cursor to “Mode” and then press the
[SAVE/SEL] button.
The <Mode> screen is displayed.
2
Use the or button of the cross key to
move the cursor to the desired item.
Settings
❍SCI: Specular component included
❍SCE: Specular component excluded
❍SCI+SCE: Automatic SCI/SCE switching
3
Press the [SAVE/SEL] button.
The selection is confirmed and the screen returns to the
<Meas. Cond.> screen.
Note
If you press the [TARGET] (Back) button without pressing the [SAVE/SEL] button, you return to the
<Meas. Cond.> screen without changing the setting.