Filter
Top Products
E-19
Preparation
Connecting the AC Adapter
M
emo
When the external output terminal is used for data communication or printing, more power will be required. In this
case, it is recommended to use the AC adapter (AC-A305) rather than batteries.
Note
• To supply AC power to the instrument, always use the AC adapter (AC-A305) supplied with the instrument.
• Before connecting or disconnecting the AC adapter jack or plug, make sure that the instrument is turned OFF.
[Operating Procedure]
1
Make sure that power is OFF (Power switch is set
to “ ”.).
2
Open the connector protection cover of the AC
adapter terminal on the instrument.
3
Connect the AC adapter connector jack to the AC
adapter terminal.
4
Insert the AC adapter power plug to an AC outlet
(100 to 240 VAC, 50-60 Hz).