Filter
Top Products
E-105
Connecting to an External Device
4
Use the or button of the cross key to move
the cursor to “Search” and then press the
[SAVE/SEL] button.
Available Bluetooth devices are searched for and the result is
listed on the LCD screen.
• From the list, find the Bluetooth address of the printer you
checked during the procedure of page E-102 “Preparation
of the Printer”.
• The search result may not be correct depending on the radio
wave condition of the surrounding environment. If you
cannot find the Bluetooth address of your printer in the list,
make sure that the printer is turned ON and its battery is
fully charged, and then try the search again.
5
Use the or button of the cross key to move
the cursor to the Bluetooth address of the
printer.
6
Press the [SAVE/SEL] button.
The printer is registered as the printing destination of the
instrument. Now you can print measured data or other data
from the printer.