Filter
Top Products
E-39
Condition Setting
Observer
Select the observer angle: 2° or 10°.
[Setting Procedure] Start the procedure from the <Disp. Cond.> screen.
1
Use the or button of the cross key to
move the cursor to “Observer” and then
press the [SAVE/SEL] button.
The <Observer> screen is displayed.
2
Use the or button of the cross key to
move the cursor to the desired item.
Settings
❍2°: 2° observer (CIE1931)
❍10°: 10° observer (CIE1964)
3
Press the [SAVE/SEL] button.
The selection is confirmed and the screen returns to the
<Disp. Cond.> screen.
Note
If you press the [TARGET] (Back) button without pressing the [SAVE/SEL] button, you return to the
<Disp. Cond.> screen without changing the setting.