Filter
Top Products
E-87
Measured Data Operation
When Manual Scan is Set
When the Scan Name method is set to “Manual Scan”, follow the procedure below to read a “name” with
the bar code scanner.
[Operating Procedure]
Start the procedure from the <Menu> screen of the <Sample> screen.
1
Use the or button of the cross key to move
the cursor to “Scan Name” and then press the
[SAVE/SEL] button.
The <Scan Name> screen is displayed.
Read “name” data with the bar code scanner.
M
emo
• Pressing the [Cancel] (Back) button cancels the name
reading.
Note
• When the bar code scanner fails reading a name, an error
message appears to prompt the user to invoke the manual
scan to read the name again.
• Although the Bluetooth connection is established, the
input may be disabled in the case when the Scan Name
operation is attempted while the bar code scanner is
turned off.