Filter
Top Products
E-72
Other Settings
Setting the Power Save Mode
The CM-700d/600d features a power save function which turns off the screen display and stops the power
supply to the flash circuit after no operation was made for a specified period of time. The period before the
activation of the power save function can be set to 0 (OFF) or within the range from 1 to 60 minutes.
Note
The power save function is factory-set to OFF.
[Setting Procedure]
1
Hold down the [MENU] button and press the
button of the cross key.
The <Option> screen is displayed.
2
Use the button of the cross key to move the
cursor to “Settings” and then press the
[SAVE/SEL] button.
The <Settings> screen is displayed.
3
Use the button of the cross key to move the
cursor to “Low Power” and then press the
[SAVE/SEL] button.
The <Low Power> screen is displayed.