Filter
Top Products
E-79
Displaying the Measurement Results
• Color difference graph
Spectral Reflectance Graph
The following screen is displayed when “Graph Spec.” has been selected for “Disp. Type” of the current
display conditions.
1 Position of the currently selected wavelength
2 WL: Select the wavelength used in the spectral reflectance graph.
To select wavelength, use the button of the cross key to move the cursor to the value at the
bottom of the screen (unit: nm), then press the or button of the cross key.
3 SCI: Spectral reflectance in SCI (Specular Component Included) mode
* When the specular component mode is SCE, no value is displayed.
4 SCE: Spectral reflectance in SCE (Specular Component Excluded) mode
* When the specular component mode is SCI, no value is displayed.
5 Spectral graph: The graph shows the spectral reflectance measured in SCI mode with a blue
line, and it shows the reflectance measured in SCE mode with a green line.
L* axis (color difference graph)
a * axis (color difference graph)
b* axis (color difference graph)
Measuring point
Scales for the axes
Specified box tolerances
Position of target color
1
2
3
4
5