Filter
Top Products
E-51
Color Difference Target Color Data Operation
2
Use the or button of the cross key to move
the cursor to the desired item.
M
emo
• If / is displayed at the top of the screen, you can use the
or button of the cross key to change the combination of
the specular component mode and illuminant used for the
screen display.
• If / is displayed on the left side/end of the screen, you
can use the or button of the cross key to scroll the
display screen upward or downward.
3
Press the [SAMPLE] (Edit) button and change the
setting.
• When you select an item which is currently checked and press
the [SAMPLE] (Edit) button, the check mark is cleared. When
you press the [SAMPLE] (Edit) button again, the cursor
moves to the setting value. Use the or button of the
cross key to change the value.
• When you select an item which is not currently checked and
press the [SAMPLE] (Edit) button, the cursor moves directly
to the setting value. Use the or button of the cross key
to change the value.
• To set each parameter l, c and h for CMC, ΔE*94 and ΔE00, place the cursor on the item and press the
[SAMPLE] (Edit) button, and the cursor moves to the value of the item. Press the or button of the
cross key to change the value.
M
emo
You can move the cursor between the digits of the value by pressing the or button of the cross key.
Settings
❍±0.0 to 20.0
* Settings of each parameter l, c and h for CMC, ΔΕ*94 and ΔE00 are 0.00 to 9.99.
• You need to press the [SAVE/SEL] (OK) button to confirm the change every time you change the setting
of an item.