Filter
Top Products
E-24
Items You Must Know
Example of assigned functions
For example, when the screen shows the guidance
, the [SAMPLE], [SAVE/
SEL] and [TARGET] buttons are assigned with the Edit, Save and
Back functions respectively. In this manual, when the button
name and the function assigned to the button are different, the
button name and function are described as “the [SAMPLE] (Edit)
button” or “[TARGET] (Back) button”.
Battery Alarm
The CM-700d/600d can be powered from the standard AC adapter (AC-A305) or AA-size alkaline or
nickel-metal-hydride rechargeable batteries. When the instrument is used with batteries, two types of
battery alarm indication will appear when battery power level is low. When the battery power is
sufficient, no battery alarm indication is displayed.
(Low battery indication)
When this indication appears, new batteries or the AC adapter should be prepared in the near future.
Even with this indication displayed, measurements are still possible.
If you continue using the instrument with the low battery indication being displayed, ER002 (low
battery voltage error) is displayed. When this error is displayed, replace the batteries immediately
with new ones or connect the AC adapter.
Data Saving
Data used with this instrument are saved automatically. The white calibration data stored in the internal
memory after you perform white calibration is retained even after the instrument is turned off.
Pairing Number
In addition to individual serial numbers, the instrument and White Calibration Cap bear 5-digit numbers
called “pairing number”. Before starting white calibration, confirm that the instrument and White
Calibration Cap have the same pairing number.
Edit Save
Back
Pairing number
Serial number of the
White Calibration Cap
The instrument and White Calibration Cap to be used together must have the same
pairing number.
White Calibration Cap
CM-700d/600d