Filter
Top Products
E-112
Connecting to an External Device
Preparation of the Instrument
Set the Bluetooth capability of the instrument to ON.
Note
You cannot register a Bluetooth bar code scanner until the Bluetooth capability of the instrument is set to ON.
[Operating Procedure]
1
Hold down the [MENU] button and press the
button of the cross key.
The <Option> screen is displayed.
2
Use the or button of the cross key to move the
cursor to “Communication” and then press the
[SAVE/SEL] button.
The <Communication> screen is displayed.
3
Use the or button of the cross key to move the
cursor to “Bluetooth” and then press the [SAVE/
SEL] button.
The <Bluetooth> screen is displayed.
4
Use the button of the cross key to move the
cursor to “ON” and then press the [SAVE/SEL]
button.
The Bluetooth capability of the instrument is turned ON and
can be used.
When the setting finishes, the screen returns to the
<Communication> screen.